Detailed Description:
3-stage Whole House/Cottage Water Filter
Are you concerned with scale and mineral deposits in your pipes and appliances? Our 10” Standard Whole House is cost-effective for smaller spaces such as RV's, apartments, cottages, and any other light duty applications where space is at a premium. This system will not disinfect water should only be used in areas where the water supply is biologically safe, or in conjunction with a UV sterilizer or other disinfection techniques.
If you have a larger home/cottage or have more than 2 people using the water consistently, you may want to consider looking at some of our higher capacity systems.
Pre-loaded Filter Cartridges:
Vertical Hydraulic Gauge
Having a pressure gauge is helpful in monitoring your incoming water pressure, internal unit pressure & when to replace the filters. It's best to replace the filters when you see changes in reading start, an increasing pressure drop is a good indication that the cartridges are starting to clog with particulate or the filter's media is exhausted as the water inside the system can’t pass through the filters normally.
Removes/Reduces:
- Sediment (silt, dirt, rust, ETC.)
- Pesticides
- Bad Taste & Odors
- Giardia Cysts
- Chlorine
- Turbidity
- Herbicides
- VOCs (Volatile Organic Compounds)
- THMs (Trihalomethanes)
- MTBEs (Methyl Tert-Butyl Ethers)
Includes:
- 1x 3-Stage White Steel Mounting Bracket
- Set of 3 filters
- 3x 10" Filter Housing, ¾ NPT Inlet/Outlet
- 1 x Opening Spanner / Wrench
- 2x Dry Pressure Gauges
Specifications:
- Filter Life: Approx. 6 to 12 months
- Maximum Recommended Operating Pressure: 90 psi
- Maximum Operating Temperature: 125°F
- Recommended Operating Temperature Range: 40-100°F
- Dimensions: H 15 inch x W 6 inch x L 17
- Total Weight: Approx. 14 Lbs with Filters
- Flow Rate: 1-10 GPM* for ¾" Inlet/Outlet
*Pressure drop will be determined based on feed water pressure, filter cartridge, fluid viscosity, filter life, and conditions.
